Owners Manual
System Setup
3. With the cursor pointing to INPUT CONFIG, press SET on the front Setting the Video
panel or the remote.To congure the Video of a video input:
The Input Conguration sub-menu appears:1. Move the cursor to VIDEO by using the and buttons on the
front panel or remote.
INPUT CONFIG2. Press the and buttons on the front panel or remote to scroll
> DVD CONFIG
VIDEO 1 CONFIGthrough the available video input choices.
VIDEO 2 CONFIGThe input choices appear as follows as you scroll through them:
VIDEO 3 CONFIG
VIDEO 4 CONFIGauto? component? s video? composite
TUNER CONFIGSelect the one that matches the connections you have made to the input
CD CONFIG
TAPE CONFIGbeing adjusted.
AUX CONFIG
Auto samples analog video inputs and selects the best available signal.
RETURN TO MAIN MENU
If you are using a DVI connection from your DVD player, the Model 1070
There are 5 video inputs to congure: DVD and Videos 1-4. Conguration will default to DVI 1 when it detects a signal at that input. Note that the
of most of the inputs follow the same steps. For the following example DVI 1 input is available only when you select DVD. It is ?hard-wired to
we'll use the DVD Input. To select a different input to congure, use that input, but is available only when a signal activates it.
the Up and Down cursor buttons. Once you?ve selected an input to The DVI 2 input is ?hard-wired? to the Video 2 input. If you have a second
congure, press Set. DVI (HDMI) source, you should make the conguration adjustments
4. With the cursor pointing to DVD CONFIG, press SET on the front for the device connected to DVI 2 in the Video 2 input.
panel or the remote.
Setting the OSD (On-screen display)
The DVD Conguration sub-menu will appear:
To congure the appearance of the OSD when a video input is selected:
DVD CONFIG1. Move the cursor to OSD by using the and buttons on the front
> AUDIO :ANALOG panel or remote.
VIDEO :AUTO2. Press the and buttons on the front panel or remote to toggle
OSD :ONbetween ON and OFF.
SURR:DOLBY PLIIx-C
LEVEL TRIM : 0dBIf you select ON, messages will appear at the bottom of your video display
AUTO POLL :ONwhen you make an adjustment to the Model 1070, such as a volume change
BASS : 0dBor other parameter adjustment, using the remote or front panel.
TREBLE : 0dB
LIP SYNC DELAY: 0mSIf you select OFF, these on-screen messages, will not appear.
RETURN TO INPUT MENU
NOTE: When you switch to another input, the OSD choice you?ve
The following steps will guide you through the process of choosing the correct made for that input will take priority.
settings for your video input devices.
Setting the Surround Format
Setting the Audio
To congure the Surround Format of a video input:
To congure the Audio of a video input:
1. Move the cursor to SURR by using the and buttons on the
1. Move the cursor to AUDIO by using the and buttons on the front panel or remote.
front panel or remote.
2. Press the and buttons on the front panel or remote to scroll
2. Press the and buttons on the front panel or remote to scroll through the preferred surround format for this input.
through the available audio input choices.
If you are using an analog input, or a digital input receiving a 2-channel
The input choices appear as follows as you scroll through them:
signal, or if the video source is stopped or turned off, the choices appear
analog? ext 7.1? optical 1? optical 2? optical 3?as follows as you scroll through them:
optical 4? coaxial 1? coaxial 2? coaxial 3? coaxial 4pliix-c? pliix-m? pliix-x? pro logic? dolby plii-c?
Select the one that matches the connections you have made to the input dolby plii-m? dolby plii-x? neo-6 cinema?
neo-6 music? 7 stereo? 5 stereo? stereo
being adjusted.
NOTE: Even if you choose a digital input, you will not be able to see NOTE: Your choices will differ depending on the number of speakers
all the surround format choices available UNLESS that input is receiv-you are using and whether you?ve selected a digital or analog audio
input. For example, you will not see 7 stereo for a 5.1 system. You will
ing a digital audio signal from your source.
not see any all-digital formats if you?ve selected an analog input.
Model 127070 7.1 Channel Surround Sound Receiver |
ACEC
